Winbook FX, Руководство пользователя

Страница: 111 / 123

Panels and clicking on Devices . When the System Properties dialog box appears, check that
the entry for CD-ROM is there. The dialog box should appear as follows: [FX 10-44]
If the TEAC drive is not there, then install the drivers by simply installing the CD-ROM
module in the Media Bay and booting the [FX 10-45] system. If a dialog box asks if you
want to run the hardware wizard, indicate
Yes . Another way is to start the hardware wizard is
by selecting Start, Setting , and then Control Panel , and Add New Hardware . Either
method will install the TEAC drivers for your CD-ROM unit when Windows 95 scans the
system.
Your music CD may actually be playing, but the volume is set too low for you to hear. On
the right side of the Windows 95 Task Bar, double click the
Speaker Icon. Adjust the
volume settings for CD & Volume Control.
NO SOUND ON HEADPHONES
I can’t hear sound on my headphones.
Check the volume levels with the Popup Status window. Check that Mute is not enabled.
Are the headphones connected? Make sure the cord is plugged into the external speaker jack.
This is the right most jack as viewed from the rear. It has the headphone icon on it.