Winbook FX, Руководство пользователя

Страница: 110 / 123

or use one of the existing ones in its place.
PRINTER PRINTS STRANGE CHARACTERS
My printer prints strange characters that are not in the document that I am trying to
print.
Try turning the printer’s power switch off to reset it. In your application or printer spooler,
cancel the print job. Turn the printer back on and try to print the document again.
You may not have the printer drivers set up properly. See printer problem number 1 for
suggestions about printer drivers.
PARALLEL PORT DEVICES DON’T WORK
Special devices that I connect to the Parallel Port do not function properly.
You may need to enable special options in the Setup Program for this device. Some devices
require two-way communication through the printer port to operate properly. You can choose
two-way communication for the port in the Setup Program menus.[FX 10-43
See "Check the Setup Program Settings" under Fast Fixes for instructions on entering
and leaving the Setup Program.
Enter the Setup Program.
Select
Advanced menu.
Set LPT Port : for LPT1
Set LPT Mode : for Bi-directional .
If your device is ECP Aware, set LPT Mode : for ECP .
Leave the Setup Program.
AUDIO
MUSIC CDs WON’T PLAY
My Music CDs won’t play.
Make sure the audio program is running in Windows 95. Click on Start, Programs, Audio
Applications, CD player or Audio Rack to activate the CD player.
Check the volume level by pressing <Fn> + <F8> and watching the Popup Status display
every time you change the volume level.
Check that
Mute is not enabled. Press <Fn> + <F2> to open the Pop Status window and
check.
Check to see that the CD-ROM driver is installed by going to
Start, Settings, Control