Winbook FX, Руководство пользователя

Страница: 112 / 123

Are you using the correct connector? The WinBook FX’s external speaker connector is
compatible with a 3.5mm stereo audio plug. If you are using a different plug, it may not be
compatible.
Your headphones may actually be working, but the volume is set too low for you to hear. On
the right side of the Windows 95 Task Bar, select the
Speaker icon. Adjust the volume
setting for the CD, Line In, and Volume Control.
Inspect the cord for wear or damage. Usually you will find this at the ends of the cable where
connectors are attached. If you find damage to the cord, repair or replace the cord, then try
again.[FX 10-46]
NO SOUND FROM BUILT-IN SPEAKERS
I can’t hear sound from the built-in speakers.
Check the volume levels with the Popup Status window. Check that Mute is not enabled.
If you have external speakers or headphones plugged into the WinBook FX, the built-in
speakers are automatically disabled. Try unplugging external speakers or headphones to se if
the audio is restored to the built-in speakers.
Your speakers may actually be playing, but the volume is set too low for you to hear. On the
right side of the Windows 95 Task Bar, select the
Speaker icon. Adjust the volume settings
for the CD, Line-In, and Volume Control.
NO SOUND FROM EXTERNAL SPEAKERS
I can’t hear sound from speakers that I connected.
Check the volume levels with the Popup Status window. Check that Mute is not enabled.
Are the speakers connected: Make sure the cord is plugged into the external speaker jack.
Make sure that the plug is inserted into the right most jack as viewed from the rear the one
with the earphones on it.
Are you using the correct connector? The WinBook FX external speaker connector is
compatible with a 3.5mm stereo audio plug. If you are using a different plug, it may not be
compatible.
Your speakers may actually be playing, but the volume is set too low for you to hear. On the
right side of the Windows 95 Task Bar, double click the
Speaker icon. Adjust the volume
settings for the CD, Line-In, and Volume Control.[FX 10-47]
Inspect the cord for wear or damage. Usually you will find this at the ends of the cable where
connectors are attached. If you find damage to the cord, repair or replace the cord, then try
again.
Most external speakers have their own volume control. Make sure that this volume control is
not turned all the way down.
Some external speakers require a source of power in order to work correctly. Usually these
are referred to as "powered speakers". If you are using powered speakers, you will have to
either install batteries or plug them into an AC outlet to get them to work correctly. You may
also have to turn the speakers on with a switch to get them to work properly. Consult your
external speaker manual for more details.