Wilo Yonos GIGA-N 125-5,5, Инструкция по установке и эксплуатации

Страница: 47 / 80

Operation en
Installation and operating instructions Wilo-Yonos GIGA-N 47
ƒ
To confirm the change, press the operating button.
Current status of disable function:
ƒ
Disable active
No changes can be made to setpoints or settings. Read-only access to all menu ele-
ments is maintained.
ƒ
Disable inactive: the elements of the basic menu can be edited (menu ele-
ments <1.0.0.0>, <2.0.0.0> and <3.0.0.0>).
NOTICE
To edit the sub-elements of menu <5.0.0.0>, service mode must also be activated.
ƒ
ON
2
Reset DIP switch 2 to the “OFF” position.
The display returns to the status page.
NOTICE
Errors can be acknowledged after a waiting period despite the “access disable” being
active.
8.6.8 Activating/deactivating termina-
tion
In order to establish a definite communication connection between two electronic
modules, it is necessary to terminate both ends of the cable.
To activate or deactivate:
ƒ
ON
X
Set DIP switches 3 and 4 to the “ON” position.
Termination is activated.
NOTICE
Both DIP switches must always be in the same position.
ƒ
ON
X
To deactivate, return the DIP switch to the starting position.
8.7 Menu elements reference
This chapter gives an overview of all elements at all menu levels. The menu number and
the element type are designated separately, and the function of each element is ex-
plained. If applicable, there is information about the settings options of the individual
elements.
NOTICE
In certain situations, some elements are hidden. These are therefore skipped in the
navigation of the menu.
Example: If the external setpoint adjustment under menu <5.4.1.0> is set to “OFF”,
menu number <5.4.2.0> will be hidden. Menu number <5.4.2.0> is only visible if the
external setpoint adjustment in menu <5.4.1.0> is set to “ON”.
No. Designation Type Symbol Values/explanations Display conditions
1.0.0.0
Setpoint
±
Setting/display of setpoint
(for additional information, see “Adjusting
the setpoint” chapter)
2.0.0.0
Control mode
±
Setting/display of control mode (for addi-
tional information see “Control modes”
and “Setting the control mode” chapters)