Wilo Yonos GIGA-N 125-5,5, Инструкция по установке и эксплуатации

Страница: 45 / 80

Operation en
Installation and operating instructions Wilo-Yonos GIGA-N 45
8.6.3 Navigation
4.1.0.0 4.0.0.0
5.0.0.0
4.4.0.0
4.4.3.0
1.0.0.0
2.0.0.0
4.2.0.0
4.4.1.0
±
±
Fig. 42: Example navigation
ƒ
Change to menu mode (see “Changing to menu mode” chapter).
Carry out general menu navigation as follows (see example navigation): During
navigation, the menu number flashes.
ƒ
To select the menu element, turn the operating button.
The menu number is increased or decreased. The symbol of the menu element and
the setpoint or actual value are shown if necessary.
If the downward-pointing arrow for “Level down” is displayed:
ƒ
To change to the next menu level down, press the operating button.
The number of the new menu level is displayed, e.g. when changing from <4.4.0.0>
to <4.4.1.0>. The symbols for the menu element and/or current value (setpoint, ac-
tual value or selection) are displayed.
ƒ
To return to the next highest menu level, select the “Level up” menu element
and press the operating button.
The number of the new menu level is displayed, e.g. when changing from <4.4.1.0>
to <4.4.0.0>.
NOTICE
If the operating button is pressed for 2 seconds while a “Level up” menu element is
selected, the display jumps back to the status page.
8.6.4 Changing selection/settings
5.6.3.0
5.6.3.0
S
S
300
10
5.6.3.0
±
12.3
Fig. 43: Changing settings and returning to the
“Selection/settings” menu element
To change a setpoint or a setting:
ƒ
Navigate to the desired “Selection/settings” menu element.
The current value or status of the setting and the associated symbol are displayed.
ƒ
Press the operating button. The symbol representing the setpoint or the set-
ting flashes.
ƒ
Turn the operating button until the desired setpoint or setting is displayed. For
an explanation of the settings represented by the symbols, see table in the “Refer-
ence menu element” chapter.
ƒ
Press the operating button again.
2.0.0.0
2.0.0.0
2.0.0.0
2.0.0.0
±
12.3
Fig. 44: Changing settings and returning to the
status page
The selected setpoint or setting is confirmed, and the value or symbol stops flashing.
The display is back in menu mode with the menu number unchanged. The menu num-
ber flashes.