Wilo Yonos GIGA-N 125-5,5, Инструкция по установке и эксплуатации

Страница: 18 / 80

en Product description
18 WILO SE 2020-10
NOTICE
The flow value that is shown on the IR-Monitor/IR-Stick display or output to the
building management system must not be used to control the pump. This value is
merely an indicator of general trends.
A flow value is not output by every pump type.
Always read and follow the material safety data sheet for the fluid being pumped!
4.8 Scope of delivery
ƒ
Wilo-Yonos GIGA-N pump
ƒ
Installation and operating instructions
4.9 Accessories
Accessories have to be ordered separately.
ƒ
IR-Monitor
ƒ
IR-Stick
ƒ
PLR IF module for connecting to PLR/interface converter
ƒ
LON IF module for connecting to the LONWORKS mains network
ƒ
BACnet IF module
ƒ
Modbus IF module
ƒ
CAN IF module
ƒ
DPS sets
NOTICE
IF module may only be inserted when the pump is de-energised (voltage-free).
4.10 Permissible forces and torques on
the pump flanges
Z
Y
X
Y
X
Z
Fig. 8: Permissible forces and torques on the
pump flanges – pump made of grey cast iron
DN Forces F [N] Torques M [Nm]
F
X
F
Y
F
Z
Σ Forces F M
X
M
Y
M
Z
Σ Torques M
Pressure port
32
315 298 368 578 385 263 298 560
40
385 350 438 683 455 315 368 665
50
525 473 578 910 490 350 403 718
65
648 595 735 1155 525 385 420 770
80
788 718 875 1383 560 403 455 823
100
1050 945 1173 1838 613 438 508 910
125
1243 1120 1383 2170 735 525 665 1068
150
1575 1418 1750 2748 875 613 718 1278
Suction port
50
578 525 473 910 490 350 403 718
65
735 648 595 1155 525 385 420 770
80
875 788 718 1383 560 403 455 823
100
1173 1050 945 1838 613 738 508 9100
125 1383 1243 1120 2170 735 525 665 1068
150
1750 1575 1418 2748 875 613 718 1278
200
2345 2100 1890 3658 1138 805 928 1680
Values in acc. with ISO/DIN 5199 – class II (2002) – Appendix B, Family no. 1A.
Table 3: Permissible forces and torques on the pump flanges
If not all working loads reach the maximum permitted values, one of these loads may
exceed the normal limit value. This is under the condition that the following additional
conditions are fulfilled:
ƒ
All force and torque components are limited to 1.4 times the maximum permitted
value.