Kunststoffschweißtechnik
Maintenance / Repair / Transport
Chapter 7
14.01.2015 Working
Instructions
WIDOS 4002 S CNC 3.0
Page 44 of 92
7.4. Clamping
elements
For a long service life, clean and grease regularly the threaded spindles and the joint parts
which are used for clamping the pipes.
7.5. Planer
Check the cutting capacity of the blades, exchange if necessary (grinded on both sides,
max. thickness of chip = 0,2 mm !)
Check and grease now and then the tension of the driving chain in the planer, for that
purpose screw off the housing of the planer. The chain must be hand-tensioned.
7.6. Fuses into electric switch cupboard
No.
Denomination / Function
F1
Overload release 16 A; 3 pieces; main fuse
F2
Overload release 6 A; fuse for control
F40
Motor protective for planer 1,1 – 1,6 A
K2 Control
emergency-stop
Q2 Emergency-stop
contactor
T3
24 V – switch supply unit
T11 Servo
control
7.7. Disposal
At the end of their life time, the machine and the wear parts have to be disposed
of properly and non-polluting, and in accordance with the national laws of waste
disposal.
F1; F2; Q2; K2; F40; T3
T11
