Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone +49 / 71 52 99 39 - 0
W. Dommer Söhne GmbH
D-71254 Ditzingen-Heimerdingen
Fax
+49 / 71 52 99 39 - 40
info
@
widos.de
Website: www.widos.de
14.01.2015 Working
Instructions
WIDOS 4002 S CNC 3.0
Page 19 of 92
5. Starting and operating
The indications of this chapter are supposed to instruct you in the operation of the machine
and to lead you during the skilled starting of the machine.
This includes:
the safe operation of the machine
using all possibilities
economic operation of the machine
5.1. Starting
The machine may only be operated by skilled and authorized persons.
A plastic welder exam according to DVS and DVGW can be taken for the
qualification.
In danger situations for mankind and for the machine, the main power connection
has to be immediately removed.
Connect the mains plug with the local mains supply (240 V / 6,1 kVA / 60 Hz), rotary field right
handed.
The machine has to be adjusted in such a way that the machine tables are in the horizontal
line.
Connect the pneumatics on the right side with the local compressed air supply 6 – 8 bar.
The machine can be operated now.
After switching on the machine, check the phase-sequence. For that purpose
switch on the planer (with diagnosis no. 0003) and check if it is turning in the right
sense.
The machine must
absolutely
stand in the horizontal line.
5.2. Puller
claws
Take care that the puller bracket of
the heating element is positioned
between both puller claws when
swiveling into the machine.
Puller claw (basic machine)
Puller bracket (heating element)
