Kunststoffschweißtechnik
Starting and operating
Chapter 5
14.01.2015 Working
Instructions
WIDOS 4002 S CNC 3.0
Page 27 of 92
Display:
2
nd
line:
number of joint
0000
Number of joint of the selected project
Enter and display the number of joint
Select numbers with button <+> and <->.
Cursor jumps for 1 position to the right with button <Enter>.
Confirm the name of joint with button <Start>.
Abort with button <C> if need be
basic menu
Display:
2
nd
line:
opening machine
This message appears only if the machine is not
opened completely
Press button <Start> for opening machine tables.
Display:
2
nd
line:
insert pipes
clean pipes
Insert the pipes into clamping tools and clamp them with spindles and
clamping nuts.
Clean the pipe ends with non-fraying paper and detergent (e.g. PE -
cleaner) or WIDOS pipe cleaning tissues.
Confirm it with button <Start>.
Display:
2
nd
line:
closing machine
measuring dragpress.
The table opens and closes several times
the dragpressure is measured herewith
after a few seconds, the display changes
Display:
2
nd
line:
closing machine
calibrating
Slide closes
Pressure systems is calibrated
after a few seconds, the display changes
Display:
2
nd
line:
opening machine
Slide opens
after a few seconds, the display changes
Display:
2
nd
line:
insert planer
start planer
