Kunststoffschweißtechnik
Starting and operating
Chapter 5
14.01.2015 Working
Instructions
WIDOS 4002 S CNC 3.0
Page 31 of 92
Display:
2
nd
line:
WIDOS 4002 S CNC
22.11.2000 10:10
Basic menu
Current date and time
5.8.1. Error
messages
If during the work with the machine
the prescriptions of the DVS are not followed
the necessary steps for the welding process are not or not correctly performed
certain measuring devices do not function,
the following error messages will appear on the display:
T
Heating element temperature
A
Adjusting
W
Heating
U
Change
over
R
Pressure build-up ramp
t
Joining
time
p
Joining
pressure
5.9. Special
method
without
adjusting
If the specific welding pressure for adjusting is the same as for heating up (parameters for
PVC), the machine only heats up under pressure without performing the adjusting step.
In the weld log, the actual bead height is registered as: 0 mm.
5.10. Lab program
Display:
2
nd
line:
WIDOS 4002 S CNC
22.11.2000 10:10
Basic menu
Current date and time
Press button <Enter>.
Display:
2
nd
line:
Print SD card
_
Press several time button <Start> until cursor is until “Diag“
Display:
2
nd
line:
Diag Clk WICON Param
_
In case of an error, these error codes are
also appear in the first line of the display
during welding.
All error messages are logged.
