Wideye iSavi SH-100, Руководство пользователя

Страница: 41 / 72

38
iSavi
™
User Guide
04
WEB CONSOLE IN SAFE MODE
MENU OVERVIEW
SETTINGS
Factory reset
Terminal Info
Logs
Calibration
Safe Mode is a simple version of the normal Web Console with some basic settings.
If you could not access the Web Console in normal way, you can try to access the Web Console in the
Safe Mode.
ENABLE SAFE MODE
There are two methods of enabing Safe Mode.
Method 1: Enter Safe Mode by Web Console (Normal Mode)
1. With the terminal on, connect your smart devices or personal computer to the Wi-Fi of iSavi ™ .
2. Login to Web Console by typing http://iSavi or http://192.168.1.35 into the address bar of any web
browser.
3. Navigate to Settings > Terminal Settings> Firmware Upgrade to perform firmware upgrade.
iSavi ™ will be rebooted in the safe mode once you click the Firmware Upgrade button.
4. If Safe Mode is enabled successfully, all of the four Antenna Pointing LEDs are amber, refer to
page 56, Appendix A: Antenna Pointing LED Status Table.
5. Connect the computer to the Wi-Fi of your iSavi ™ .
6. Login to the Web Console in safe mode by typing http://iSavi or http://192.168.1.35 into the address bar
of any web browser.
Method 2: Enter Safe Mode by using physical buttons.
1. With the terminal off, press and hold ‘Exit Pointing Mode’ button.
2. Press the ‘Power’ button for 5 seconds.
3. Release both ‘Exit Pointing Mode’ button and ‘Power’ button.
4. If Safe Mode is enabled successfully, all the four Antenna Pointing LEDs will turn to Amber
colour, refer to page 56 , Appendix A: Antenna Pointing LED Status Table.
5. Connect the computer to the Wi-Fi of your iSavi ™ .
6. Log in to the Web Console by typing http://iSavi or http://192.168.1.35 into the address bar of any
web browser.
Note:
The username and password of the Web Console are the same for Normal Mode and Safe Mode.