26
iSavi
™
User Guide
ACCESS RIGHTS SETTING ACCORDING TO MAC ADDRESS
Navigate to
Data > Device Management
to set the allowed MAC address and the access rights.
The MAC address is a number that uniquely identifies any device connected to a network. Once the device
is connected to the terminal, the MAC address will be shown on the page.
From this page, you can also check the number of connected devices, their MAC addresses and the data
usage of the terminal.
You can add a new MAC address by clicking Add or create a nickname for an existing MAC address by
clicking on the Edit button. Data usage of the device is available at the bottom of the page.
1. Define a nickname for the device.
2. Check if the MAC address belongs to the smart phone or tablet used to host the Control app.
Only one device is allowed to use the Control app at a time.
3. You can define access rights selecting the relevant permission options.
4. The settings are stored temporarily and are not retained after terminal is rebooted.
If you plan to keep the same access rights settings, deselect
Temporary entry
so that the
access rights are stored even after the terminal is rebooted.
Note:
The actual value of the data usage might be slightly different from the readings in Control app and Web Console.
Содержание iSavi SH-100
Страница 1: ...User Guide Version 5 0 Model SH 100...
Страница 72: ...69 iSavi User Guide APPENDIX C INMARSAT COVERAGE MAP...
