Wideye iSavi SH-100, Руководство пользователя

Страница: 15 / 72

12
iSavi
™
User Guide
METHOD 2: AUDIO ASSISTED POINTING MODE
You can point iSavi ™ terminal to the satellite network by using the built-in buzzer.
STEP 1
To switch into audio assisted pointing mode, press and hold the ‘Exit Pointing Mode Button’ for 5
seconds when your iSavi™ is in LED visual pointing mode .
Exit Pointing Mode Button
All 4 LEDs will be flashing green when the audio assisted pointing mode is activated.
The beeping sound indicates the signal strength.
The frequency of the beeping will become higher when the signal is stronger.
STEP 2
Tilt the terminal up to 45 degrees from the horizontal.
STEP 3
Turn the terminal slowly in clockwise or counterclockwise until the beeping frequency
is maximised.
STEP 4
Tilt the terminal up or down slowly until the beeping frequency is maximised.
Fine tune the position until no further increase of the beeping frequency is heard.
‘Exit Pointing Mode Button’ will turn to flashing green when the signal strength is satisfactory for network
registration.
STEP 5
Press the ‘Exit Pointing Mode Button’ to exit antenna pointing mode and start network registration.
45°