WhisperKool Twin Ceiling Mount H.E. CM12000, Руководство пользователя

Страница: 17 / 61

INSTALLING THE EVAPORATOR UNIT S
13. Slide the electrical panel up and out of the primary evaporator unit.
14. Connect the green wire to the green wire, the black wire to the black wire, and the white wire to the white wire.
15. Locate the thermostat wire connections inside of the primary unit.
16. Connect the 18-5 wire for the secondary unit according to color (yellow to yellow, red to red, green to green, blue to blue, and
white to white).
17. Connect the male circular connector on the bottle probe cable to the female circular connector on the exterior of the electrical box.
18. Connect the end of the display cable labeled “UNIT” to the wire labeled “UNIT” coming from the electrical box.
19. Slide the electrical panel back down into the primary evaporator unit.
20. Reinstall the top access panel and fasten the twenty-two (22) screws into place.
21. Install the supplied three-inch pieces of cork tape around the display cable, bottle probe cable, and power wires.
2 2 . Repeat Steps 1- 21 with the secondary evaporator . (Steps 17 and 18 do not apply to the secondary unit.)
UNIT
UNIT
Page 15
08/04/21