WhisperKool Twin Ceiling Mount H.E. CM12000, Руководство пользователя

Страница: 13 / 61

POWER CABLE
CONDENSING UNIT
230V 60Hz 1 PH 15-amp
dedicated circuit
5/8" Suction Line
1/4" liquid line
1/4" liquid line
24V THERMOSTAT
(NOT INCLUDED)
18-5 THERMOSTAT
WIRE
PRIMARY EVAPORATOR UNIT
SECONDARY EVAPORATOR UNIT
DISCHARGE LOCATION DISCHARGE LOCATION
POWER CABLE POWER CABLE
115V 60Hz 1 PH 15-amp
dedicated circuit
115V 60Hz 1 PH 15-amp
dedicated circuit
24V WIRING CONNECTIONS (EVAPORATOR UNITS)
24V Wiring Connections (Evaporator Units)
F
55
° F
1.
Route a standard 18-5 thermostat wire into the primary evaporator unit.
2.
Locate the 18-5 thermostat wires inside of the primary evaporator unit.
3.
Connect the wires according to color: yellow to yellow, red to red, green to green, and blue to blue. Connect the red
adapter wire to the end of the white thermostat wire.
4.
Run the opposite end of the previously routed 18-5 thermostat wire to the s econdary evaporator unit.
5.
Locate the 18-5 thermostat wires inside of the s econdary evaporator unit.
6.
Connect the wires according to color: yellow to yellow, red to red, green to green, blue to blue, and white to white.
Thermostat Wiring Connections
1.
At the thermostat terminal block, connect the wires according to color: yellow to Y, blue to C, green to G, and red to R.
2.
Connect the opposite ends of the thermostat wires to the connections previously made between the 18-5 thermostat wire
and the primary evaporator unit. Connect the wires according to color: yellow to yellow, blue to blue, and green to green.
Connect the red thermostat wire to the red adapter wire previously connected to the white wire in Step 3 above.
3/8" Liquid Line
NOTE:
To ensure correct system
operation, the 24V thermostat
must be placed inside the
wine cellar, preferably in a
central location away from any
airflow.
24V COMMUNICTION CABLE
1/2" suction line 1/2" suction line
Page 11
08/04/21