manualshive.com logo in svg

Whisper Tech GEN PPS16, Руководство пользователя, Страница: 87 / 98

Поделиться
Скачать
Whisper Tech GEN PPS16 Скачать руководство пользователя страница 87

R

82

Correcting Warnings

Although a warning can be cleared without the physical cause being first removed, it is
recommended that the cause be determined and removed at the earliest opportunity. Warnings
are indicated by a flashing 

FAULT 

indicator. No error message is displayed.

83

Battery overtemp

Likely cause:

Battery bank temperature too high for safe charging.

Recommended Action: 

Check battery bank connections and ventilate battery bank 
compartment. Restart.

84

Clamp failed off

Likely cause:

Abnormal electrical condition, possibly resulting in raised battery 
voltage.

Recommended Action: 

Attempt to restart, contact an authorised WhisperGen service 
agent if problem reoccurs.

85

High batt volts

Likely cause:

Battery bank voltage above normal charging limits.

Recommended Action: 

Check settings of any parallel charger connected to the battery 
bank. Restart.

90

Clamp control flt

Likely cause:

WhisperGen unable to maintain correct battery charging 
voltage.

Recommended Action:

Attempt to restart, contact an authorised WhisperGen service 
agent if problem reoccurs.

92

ParChg V too high

Likely cause: 

WhisperGen operating voltage has gone too high, in an effort to 
avoid conflict with a parallel charger.

Recommended Action:

Check voltage settings of other chargers connected to the 
battery bank. Restart.

Code

Likely Cause and Recommended Action

102

Likely cause:

Exhaust gas hotter than normal, possibly due to low engine gas pressure.

Recommended Action: 

Attempt to restart, contact an authorised WhisperGen service agent if problem 
reoccurs.

Code

Error Message

Likely Cause and Recommended Action

When remedying WhisperGen warnings, please follow the
recommendations in this manual otherwise, you may injure yourself and
the warranty will be void. If the recommended action does not remedy the
warning, contact your authorised WhisperGen service agent.

Содержание GEN PPS16



































































































Отзывы:

Нет отзывов