62
First try the solutions suggested here or visit our website at
www.whirlpool.com.tw
If you experience
Possible Causes
Solution
Drying Results (cont.)
Dried loads are wrinkled
The load was not removed from the
washer dryer at the end of the
drying cycle.
Remove garments promptly at the end of the drying cycle, or
use the FanFresh
®
option.
The washer dryer was tightly packed.
Dry smaller loads that can tumble freely. Loading drum a
quarter full or less will improve drying performance and cycle
time. Results may also vary depending on fabric type.
Load too hot
Load removed before cool-downpor-
tion of cycle is complete.
Allow the drying cycle to complete the cool-down portion of
the cycle before removing the load. If you cancel the cycle
before the cool-down portion of the cycle and immediately
remove the load, it will be very hot.
TROUBLESHOOTING
Содержание 8TWFC6810LW
Страница 63: ...63 NOTES ...
Страница 64: ...W11516195A 2021 年 6 月 2021保留所有權利 All rights reserved 06 21 ...