Installation Manual: GT500 FRPP Supercharger System (750HP) (A1R2)
Last Updated: Aug 19
th
, 2010
Page 13 of 35
24.
Remove the SC inlet from SC by removing the (4) bolts (8mm socket).
25.
Remove the fuel rail from manifold by removing the (4) bolts (8mm socket).
26.
Remove 10-
rib SC belt from motor by using a 3/8” breaker bar or ratchet. Install breaker bar/ratchet into spring
loaded tensioner and rotate in a clockwise rotation, remove belt from SC pulley. Let spring loaded tensioner
return to relaxed position.
27.
Remove (1) line from 90deg rubber boot that goes to air bypass nipple. This is the long 1/8” tube with the
90deg on the end that is routed to factory bypass valve.
28.
Remove the SC from manifold by removing the (10) bolts (13mm socket).
