Installation Manual: GT500 FRPP Supercharger System (750HP) (A1R2)
Last Updated: Aug 19
th
, 2010
Page 6 of 35
NOTE
**NOTICE
: Installation of Whipple Supercharger products signifies that you have read
this document and have agreed to the terms stated within.
It’s the purchaser’s responsibility to follow all installation instruction guidelines and
safety procedures supplied with the product as it’s received by the purchaser to
determine the compatibility of the product with the vehicle or the device the purchaser
intends to install the product on.
Whipple Superchargers assumes no responsibility for damages occurring from
accident, misuse, abuse, improper installation, improper operation, lack of
reasonable care or all previously stated reasons resulting from incompatibility with
other manufacturer’s products.
There are no warranties expressed or implied for engine failure or damage to the
vehicle in any way, loss of use or inconvenience or labor reimbursement. This
includes merchantability and fitness.
NEVER SMOKE DURING THE INSTALLATION OF THE SC,
THERE WILL BE FLAMMABLE FUMES AND LIQUID AROUND THE
VEHICLE
Be sure you have read and understand the
Introduction
section and have completed the
Pre-Installation
Checklist
, then proceed to the
Illustrated Installation Guide
.
Illustrated Installation Guide
It is strongly recommended that you read through this guide before you begin installing the Whipple Supercharger.
1.
Using an air hose, blow off any loose dirt or debris from engine compartment. If really dirty, then steam clean
the engine compartment before proceeding to the next step.
2.
Release fuel system pressure.
2011
fuel pump relay
2010
fuel pump relay
