Installation Manual: GT500 FRPP Supercharger System (750HP) (A1R2)
Last Updated: Aug 19
th
, 2010
Page 9 of 35
9.
Disconnect rubber 90deg fitting from air intake tube (Ford #7R3V 9E498 BB). This will not be used later. Will be
removed from bypass nipple when SC is off.
10.
Disconnect plastic PCV hose fitting from driver side of intake manifold. To release, push green tab on bottom
side and then pull.
11.
Remove the hose clamp securing the rubber inlet hose to throttle body and air box.
12.
Remove plastic air inlet between MAF and throttle body.
13.
Remove air box from vehicle.
14.
Disconnect and remove EGR steel tube from EGR solenoid and exhaust manifold.
