Quick Start - page 40
LXE / Feb 2018
Q U I C K S T A R T G U I D E
As you can see, there are many menus, and tab options for the LXE Surface Setup
GUI. The LXE Surface Setup GUI part of the manual will cover these in detail. For the
purpose of this Quick Start Guide, we just need to know how to change the IP address,
add the associated panel hosts, and give this Surface a name so that it is later easily
identified in the system. Additionally if Engine Host Blade has not been associated with
the surface or the Blade’s ID and IP address have changed, we will need to make that
association here in the GUI.
First we should verify that the Module Panel Hosts are correctly associated with the
Surface host via their Link Local Addresses.
Click the Hardware Menu item in the LXE Surface Setup GUI.
Click Setup Surface Panels option.
Click the Rescan Button.
Once the Scan is complete you should see 1 or more Module Panel host entries on the
left side. If the panels are associated with the Surface Host, they should also appear on
the right pane. This should be the case from the factory.
