Quick Start - page 23
LXE / Feb 2018
Q U I C K S T A R T G U I D E
Optional LXE Modules
EQ/ Dynamics Module
This optional module allows you to set and control Fader EQ and DYNAMICS
settings without the need to have or use the Surface GUI Screen to apply the
settings. If you do have an HDMI Monitor for the Surface GUI, the GUI screen
will switch to appropriate screens when the EQ/DYN module is active. The
color OLED’s, Buttons and Rotary Encoders allow the user to make changes
and see a graphical result on the surface, in addition to the specific values used
for each applied Dynamic or EQ settings applied.
The buttons on this module are factory programmed and cannot be changed.
The top four buttons control the Dynamics parameters to be applied. These
buttons are labeled from left to right: EXP, EXP IN, COMP, and COMP IN.
Below this four button group are the EQ controls: HIGH, EQ IN, HIGH
MID, HPF, LOW MID, LPF, LOW, and SHELF.
These buttons work in concert with the SET button on the LXE Input mod-
ule to apply EQ or DYNAMICS to that selected Fader.
EXP – Activates the Expander controls on the EQ/DYN module.
EXP IN – Enables the Expander on the selected LXE Input module. If
this button is not lit, while in SET MODE on the Input module, the Dynamics
parameters are NOT applied to the Input module.
COMP – Activates the Compressor controls on the EQ/DYN module.
COMP IN – Enables the Compressor on the selected LXE Input module. If
this button is not lit, while in SET MODE on the input module, the Compressor
are NOT applied to the Input module.
HIGH – Activates the EQ High Frequency controls on the EQ/DYN module.
EQ IN – Enables EQ on the selected LXE Input module. If this button is
not lit, while in SET MODE on the input module, the EQ Parameters are NOT
applied to the Input module.
HIGH MID – Activates the Mid High EQ Parameters on the EQ/DYN
module.
HPF – Activates the High Pass Filter Parameters on the EQ/DYN module.
LOW MID – Activates the Low Mid EQ Parameters on the EQ/DYN module.
LPF – Activates the Low Pass Filter Parameters on the EQ/DYN module.
LOW – Activates the Low EQ Parameters on the EQ/DYN module.
SHELF – Used in conjunction with the LOW and HIGH buttons.
When you select one of the Dynamics or EQ controls, the OLED displays
will change to display the applied settings for the selected parameter.
Rotary Encoder Functions
Below the OLED displays, are three rotary encoders that will allow you
to change the values for each setting. Additional control parameters can be
accessed by pressing the encoder to change the parameter it is controlling.
