manualshive.com logo in svg

Wheatstone Corporation A-5000, Техническое руководство, Страница: 54 / 122

Поделиться
Скачать
Wheatstone Corporation A-5000 Скачать руководство пользователя страница 54

page  7 – 2

D500 / Jul 98

M E T E R   O U T P U T   M O D U L E

Meter Output Module

(MOD-500)

Module Overview

Each A-5000 console has one meter output module, which drives the

console’s three pairs of left-right VU meters: PGM, AUD and SWT
(switched). (Note: Smaller frames will only have two parts of meters,
PGM and SWT). The switched meter follows the SELECT switching at
the top of the module, allowing the console operator to meter AUD, AUX,
UTL and two external stereo line signals (analog, +4dBu balanced) which
may be brought into the module on its lower DB-25 connector.

The MOD-500 module also houses the master CUE LED indicator.

Whenever Cue is activated anywhere on the console this LED will
illuminate and the CUE signal will automatically appear on the switched
VU meter pair. When cue is de-activated, the switched meter pair goes
back to it’s previously selected signal.

Recessed front panel trim pots calibrate the three meter pairs. A VU

TRIM cover strip (not shown) can be used to prevent trimpot access once
calibration is set. (In the smaller frame with two parts of meters, the AUD
trims will have no effect).

 At the bottom of module are the timer control buttons (the timer

display is mounted in the righthand end of the console meterbridge):

AUTO – enables timer restart functions from programmed input modules

S/S – Start/Stop

RESET - return to zero (if the timer is stopped it will hold at zero; if it is

running it will reset to zero and immediately begin counting up).

HOLD – when held down freezes the timer display (the counter keeps on

going); when released the display catches up to the current count.

All user wiring to and from the MOD-500 module takes place at the

lower DB-25 multi-pin connector mounted directly beneath the module on
the console mainframe’s bottom pan. This lower connector (near the
console armrest) inputs the module’s two external stereo line signals. See
the pinout drawing on page 7-4.

While there are two DB-25 connectors, the upper one (towards the console

meterbridge) is for factory use only. It sends the module’s VU and timer control
signals to the meterbridge (a factory-provided cable runs from this upper DB-25
to a matching connector mounted at the back of the meterbridge, in the center of
the console).

RESET

S / S

HOLD

AUTO

TIMER 

LT

RT

PGM

LT

RT

AUD

LT

RT

SWT

VU TRIM

SWITCHED VU

EXTERNAL

STEREO

SELECT

1

2

AUD

AUX

UTL

CUE

 A-5000 / Nov  98

Содержание A-5000



























































































































Отзывы:

Нет отзывов