Western Scale m2000D, Техническое руководство

Страница: 13 / 54

m
2000D technical manual
Page 8
Table 2: Scale Status Information (Hopper Scales)
HOPPER SCALE
- This scale allocation is a 4 Ch annel
H opper scale consisting of 4 corners on the P rimary DLC
corner 1 goes to cell 1 on the P rimary DLC terminal box – Press the
[ TARE ] key to move to the next corner
corner 2 goes to cell 2 on the P rimary DLC terminal box box – Press the
[ TARE ] key to move to the next corner
corner 3 goes to cell 3 on the P rimary DLC terminal box box – Press the
[ TARE ] key to move to the next corner
corner 4 goes to cell 6 on the P rimary DLC terminal box
(In this example – cell 4 and 5 were disabled by the user due to damaged
cells using calibration command 525)
H – (H)opper scale allocation
Indicator to show that a H opper scale was allocated for this scale channel
S – (S)ectional scale allocation
Indicator to show that a Sectional scale was allocated for this scale channel
P – (P)rimary DLC slave selected
Indicator to show that the corners for this hopper scale are located on the primary DLC
S – (S)econdary DLC slave selected
Indicator to show that the corners for this hopper scale are located on the secondary DLC
Number of Corners allocated to the scale(1-8)
This number indicates the number of corners allocated to the hopper scale. A corner
equates to a single cell on a DLC terminal box.
HOPPER SCALES
Channel Status Information
E -
Faulty corner/cell . Only the faulty corner will have a flashing ‘ E ’ in its status field.
This way the user can scroll through the corners to find out which corners are
diagnosed as faulty. Use the
TARE key to scroll through the corners.
D - Corner/cell disabled
A - Corner / Section Adjustment mode activated.
- Cell allocated to another scale – or not accessible to the user