Western Scale m2000D, Техническое руководство

Страница: 40 / 54

m
2000D technical manual
Page 35
576 Query Active DLC Cells on Slaves: calibration command
This command is a calibration command. This command provides a means of first
obtaining the current active cells per DLC slave, and secondly providing the option of
changing the number of active AD converters per slave. If the user does not know the
number of active cells per slave, the user may simply count the number of installed load
cell connectors on the DLC slave. Enter this number as a parameter to set the number of
active converters for the DLC slave in question.
The command first requires the user to enter the slave to be queried. Please enter one of the
following values:
q
1 - Query the primary slave for active cells
q
2 - Query the secondary slave for active cells
The indicator will return number from the slave in the range from 1-8 representing the
number of active cells on that slave. The user may enter a new AD converter number
between 1-8 followed by [PRINT/SELECT] or simply press the [CLEAR] key to exit the
command.
Only the factory is allowed to make permanent changes to this setting – the
user may only look at the setting.
The factory can supply 3 variations of DLC slaves
q
4 channel DLC slave
q
6 channel DLC slave
q
8 channel DLC slave
GENERAL DLC
COMMANDS
Every time the user allocates a scale, the indicator will query the slave for its active
AD converter number in order to know how many load cells to make available to the
user for a scale allocation. When using calibration command 525 in conjunction with
commands 520 and 521, command 525 will prevent the user from selecting
corners/sections outside the boundaries as reflected by command 576. For instance, if
command 576 returns an active number of 4, then corners 5,6,7 and 8 will not be made
available to the user for a scale allocation. Also, if command 576 returns an active
number of 6 corners, then corners 7 and 8 will not be made available to the user for a
scale allocation, and so on.