Western Global FuelCube FCP1000, Руководство оператора

Страница: 22 / 32

18
6. REFUELING:
The FUEL CUBE
TM
works well as a tank to refuel other tanks, machines or equipment. Review
the pump manual prior to using the pump. Follow this procedure when refueling:
a. Transport the FUEL CUBE
TM
to refueling area.
b. Refer to Step 3
“Filling
FUEL CUBE
TM
”.
c.
Unlock and open hatch lid.
d.
Pull out refueling hose and nozzle.
e.
Extend it to the tank needing to be refueled.
f.
Connect a power supply to the pump.
g.
Turn the pump on.
h.
Use the hand-held nozzle to transfer the fuel.
i.
Turn the pump off when refueling is completed.
IMPORTANT: Do not spill fuel into the interstice (bund). Wipe up any spills.
j.
Disconnect the power to the pump.
k. Store the hose into the bund and hook the nozzle to the storage bracket.
l.
Close and lock the hatch lid.
m. Move to the next refueling location.
7.
FORKLIFTS:
The base of the FUEL CUBE
TM
is designed with pockets on four sides to allow access for the
forks of a forklift.
8.
DAMAGE:
Anything that is transported from location to location can be in an accident and damaged or
damaged during use. Any time the inner or outer tank is damaged, impaired or compromised
in any way, the tanks should be repaired and then retested up to 3 psi.
Diesel fuel is a hazardous material and should be treated as such. Do not use the unit if it is
damaged and take a chance with contaminating your worksite or the environment. Repair
and retest prior to re-using.