Western Global FuelCube FCP1000, Руководство оператора

Страница: 12 / 32

8
2.3 SAFETY TRAINING
1. Safety is a primary concern in the design and
manufacture of our products. Unfortunately,
our efforts to provide safe equipment can be
wiped out by a single careless act of an
operator or bystander.
2.
In addition to the design and configuration of
equipment, hazard control and accident
prevention are dependent upon the
awareness, concern, prudence and proper
training of personnel involved in the
operation, transport, maintenance and
storage of this equipment.
3.
It has been said, “The best safety feature is
an informed, careful operator.” We ask you
to be that kind of an operator. It is the
operator’s responsibility to read and
understand ALL Safety and Using
instructions in the manual and to follow
these. Accidents can be avoided.
4.
Working with unfamiliar equipment can lead
to careless injuries. Read this manual before
assembly or using, to acquaint yourself with
the machine. If this machine is used by any
person other than you, or is loaned or rented,
it is the machine owner’s responsibility to
make certain that the operator, prior to using:
a.
Reads and understands the
Operator’s
Manual .
b. Is instructed in safe and proper use.
5.
Know your controls and how to stop unit
quickly in an emergency. Read this
Operator’s Manual
and the one provided
with your equipment.
6.
Train all new personnel and review
instructions frequently with existing workers.
Be certain only a properly trained and
physically able person will use the
machinery. A person who has not read and
understood all using and safety instructions
is not qualified to use this machine. An
untrained operator exposes himself and
bystanders to possible serious injury or
death. If the elderly are assisting with the
work, their physical limitations need to be
recognized and accommodated.
2.4 SAFETY SIGNS
1. Keep safety signs clean and legible at
all times.
2. Replace safety signs that are missing or
have become illegible.
3.
Replaced parts that displayed a safety
sign should also display the current
sign.
4.
Safety signs displayed in Section 3 each
have a part number in the lower right
hand corner. Use this part number
when ordering replacement parts.
5.
Safety signs are available from your
authorized Distributor or Dealer Parts
Department or factory. Replacement
parts can be obtained from Western:
Canada Toll Free: 1-866-588-2637
USA Toll Free: 866-814-2470
How to Install Safety Signs:

Be sure that the installation area is
clean and dry.

Be sure temperature is above 50
⁰
F
(10
⁰
C).

Determine exact position before you
removed the backing paper. (See
Section 3).

Remove the smallest portion or the split
backing paper.

Align the sign over the specified area
and carefully press the small portion
with the exposed sticky backing in
place.

Slowly peel back the remaining paper
and carefully smooth the remaining
portion of the sign in place.

Small air pockets can be pierced with a
pin and smoothed out using the piece of
sign backing paper.