Western Global FuelCube FCP1000, Руководство оператора

Страница: 21 / 32

17
The three-
inch (3”) fill cap located on the top of the
FUEL CUBE
TM
must be securely closed
prior to moving or transporting the tank.
Follow this procedure when preparing for transporting empty, uncleaned tanks:
a. Turn the pump off by moving the control lever to the off position.
b.
Turn the generator port valves off.
c.
Close and tighten fill cap.
d.
Close or plug all auxiliary lines, hoses or other connectors with the plugs provided with the
tank.
e.
Stow the hose and hand held nozzle under the cover.
f.
Close and lock hatch-lid on the outer tanks.
5. GENERATOR STAND-BY:
The FUEL CUBE
TM
is designed to be used to provide fuel to generator sets or any other power
unit requiring fuel.
Follow this procedure when connecting as a fuel supply to an engine:
a. Place FUEL CUBE
TM
in a level area adjacent to the engine requiring fuel.
b. Install quick couplers into the tank outlets appropriate for your application. The feed or
return ports are marked with directional arrows.
NOTE: Use Teflon tape on the threads to prevent leaking at the connection.
c. Use connector components with NPT threads.
d. Thread the power unit fuel line hoses through the access slots on each side of the frame.
e. Connect to the couplers on the tank outlets.
IMPORTANT: It is recommended that a fuel filter be installed in the intake line to remove
any contaminants from the system prior to entering the engine fuel system.
f. Open tank valves and start engine.
g. Close and lock lid to prevent anyone from tampering with the fueling equipment.
h. Check the dip stick (or optional fuel gauge) and refill the tank when required to prevent
running out.
i. Turn valves off, disconnect power, disconnect couplers, and lock lid when FUEL CUBE
TM
is not being used.