Western Global FuelCube FCP1000, Руководство оператора

Страница: 20 / 32

16
4.6 FIELD USE
The FUEL CUBE
TM
is designed to efficiently and effectively transfer and refuel equipment in any
location.
Each owner and user of the
FUEL CUBE
TM
should review this manual as part of the regular
training and review procedure. Follow all instructions.
1. OWNER/OPERATOR RESPONSIBILITY:
It is the responsibility of each owner, operator or user to be familiar with all regulations that
apply to the equipment for filling, transferring and refueling equipment. Perform all tests per
the regulations and maintain the appropriate records and paperwork. Be sure everyone is
properly trained to use or the
FUEL CUBE
TM
. Do not smoke around the unit. Do not allow
others to smoke around unit.
2. VENTING:
a. Each tank is designed with a stainless steel and polyethylene pressure/vacuum relief vent
with elastomer seals set at 2 psi. Maintain in good condition. Replace vent if damaged in
anyway. Replace vent at the 60 month test.
b. The fill cap is designed with a 3 inch NPS stainless steel fusible (Viton) ring that would
melt. Keep it in good condition. Replace cap if it is damaged in any way.
c. The outer tank is vented to atmosphere through the hose slots under the lid. Do not
obstruct in any way.
3. FILLING FUELCUBE:
A three-inch
(3”) fill cap is located on the top of the tank and is used to fill the tank. Turn the
cap to open the tank for filling. Open the cap slowly to release any build-up of pressure due
to extreme temperatures. Close and tighten cap when filling is completed. Follow this
procedure when filling tank:
a. Level the tank or the vehicle that it is mounted on.
b. Loosen fill cap and lay to side
NOTE: The cap is tethered to the frame with a steel cable to prevent it from falling between
the tanks Keep cable in good working condition. Do not disconnect.
c. Fill the tank with a hand-held nozzle.
IMPORTANT: Do not direct connect. Take care not to spill any fuel.
d. Watch the Dipstick or sight glass (fuel gauge optional) on tank while filling to only fill to
95% capacity. 95% is the legal capacity for the
FUEL CUBE
TM
.
e. Close and tighten fill cap.
NOTE: Hand tighten fill cap, then tighten another ¼ turn to minimize chance of leakage.
f. Close and lock the hatch lid.
4. CLOSURES FOR TRANSPORT (of empty, uncleaned tanks):