Western Global FuelCube FCP1000, Руководство оператора

Страница: 14 / 32

10
2.7 MAINTENANCE SAFETY
1. Good maintenance is your
responsibility. Poor maintenance is an
invitation to trouble.
2. Follow good shop practices.

Keep service area clean and dry;

Be sure electrical outlets and tools
are properly grounded;

Use adequate light for the job at
hand.
3. Make sure there is plenty of ventilation.
Never use the engine of the transport
vehicle in a closed building. The
exhaust fumes may cause asphyxiation.
4. Before working on this machine,
disconnect the power to the pump and
close all valves.
5. Do not smoke when performing any
maintenance work. Keep sparks, open
flames and hot material away from work
site.
6. Always use personal protection devices
such as eye, hand and hearing
protectors, when performing any service
or maintenance.
7. A fire extinguisher and first aid kit should
be kept readily accessible while
performing maintenance on this
equipment.
8. Periodically tighten all bolts, nuts, and
screws and check that all electrical
connections are properly secured to
ensure unit is in a safe condition.
9. When completing a maintenance or
service function, make sure all safety
shields and devices are installed before
placing unit in service.
10. Establish a lock-out tag-out policy for
the work site. Be sure all personnel are
trained in and follow all procedures.
2.8 STORAGE SAFETY
1. Store the unit in an area away from
human activity.
2. Do not permit children to play on or
around the stored machine.
3. Store the unit in a dry, level area.
Support frame with planks if required.
4. Disconnect all power connections and
close all valves before storing.
2.9 TRANSPORT SAFETY
(TRANSPORT EMPTY ONLY)
1. Read and follow the
Operator’s Manual
before using the FUEL CUBE
TM
.
2.
Review and follow the User’s Notice inside
the lid before using.
3. Be sure each driver has the appropriate
driver’s license required by the Federal,
Provincial/State or local authorities.
4. Keep shipping papers describing tank and
contents with vehicle at all times.
5. Turn off pump (move lever down) and close
generator port valves.
6. Be sure filler cap is on and closed securely.
7.
Be sure all outlets are securely closed/
plugged with manufacturer-provided plugs.
8.
Ensure outer tank is empty of spillage.
9. Close and padlock hatch to prevent vibration
releasing the catch.