Western Global FuelCube FCP1000, Руководство оператора

Страница: 19 / 32

15
4.3 PRE-OPERATION CHECKLIST
Efficient and safe operation of the
FUEL CUBE
TM
requires that each operator
reads and understands the using procedures
and all related safety precautions outlined in
this section. A pre-operation checklist is
provided for the operator. It is important for
both the personal safety and maintaining the
good
mechanical condition of the
FUEL CUBE
TM
that this checklist is followed.
Before using the FUEL CUBE
TM
and each time
thereafter, the following areas should be
checked off:

Disconnect and secure all the lines and
hoses.

Close and tighten filler cap when tank is
full.

Turn pump off and disconnect or remover
power lines.

Check the interstice area (bund). Clean
if there is any debris, trash or diesel fuel.

Check that all the required
documentation and placards are with the
unit and in good condition.
4.4 MACHINE BREAK-IN
Although there are no operational restrictions
on
FUEL CUBE
TM
when used for the first time,
it is recommended that the following
mechanical items be checked:
After Using for 1 and 5 Hours:

Check all nuts, bolts and other fasteners.
Tighten to their specified torque level.

Check that the fuel lines and
connections are in good condition and
there are no leaks.

Check that the electrical system is in
good condition. Be sure all terminals and
connectors are clean and fully engaged.

Then go to the regular service scheduled
as defined in Section 5.
4.5 MACHINE CONTROLS
The FUEL CUBE
TM
is designed and built with
components that allow for easy and
convenient filling and transferring fuel. Each
operator should be trained in
FUEL CUBE
TM
operation before using the controls on the
unit. They must also be required to know all
the legal and regulatory regulations relating to
the transporting and handling of fuel.
Review the controls on the unit, as well as
any controls on accessory equipment prior to
using and as a part of your regular training
program.
The
FUEL CUBE
TM
is designed with a line for
drawing fuel out of the tank and a line for
returning the unused fuel from the remote
engine.
Pumps, gauges, meters, quick couplers and
nozzles are optional equipment. All third-
party manufacturer instructions provided with
optional equipment should be followed.