5. In the terminal, for ESM B, type sg_wr_mode <dev> --dbd --page=20,02
--contents=e0,02,00,14,0,0,0,0,<flags 4 bytes>,<IP 4 bytes>,<Netmask 4 bytes>,<Gateway 4 bytes>.
6. Press Enter.
7. Verify the values returned look similar to this example: sg_wr_mode /dev/sgx --dbd --page=20,02
--contents=e0,02,00,14,00,00,00,00,ff,ff,ff,fe,c0,a8,00,0b,ff,ff,ff,00,c0,a8,00,01.
Note: The result of this example is disabling the DHCP, setting static IP to the default address, net
mask, and the gateway.
39
9
Connecting to the Network
Installation Guide
9.2
Changing Network Configurations via SES
