Specification
Condition
• Ultrastar He12 12TB HDD SAS 512e (SE, ISE, and TCG)
• Ultrastar He12 12TB HDD SAS 4Kn (SE, ISE, and TCG)
Yes
Hot Swappable
Minimum: 24
Maximum: Up to 60
Quantity (per enclosure)
1.4 lbs. / 0.63 kg.
Weight
H: 26.1mm x W: 101.6mm x D: 147mm / H: 1in. x W: 4in. x D:
5.8in.
Dimensions
11.2.1
Installing Drive Kits
Personnel
Warnings
Required Tools
1
CAUTION
Ensure that drives are handled
carefully to avoid damage to the drive and chassis
connectors.
CAUTION
Electrostatic discharge can
harm delicate components inside HGST products.
None
To install the drive kits, do the following:
1. From a computer, connect to an sg_utils enabled server.
2. From a Linux machine, launch a Terminal.
3. Verify that the enclosure is connected to the Host.
a) To identify the SES target, type lsscsi –g into the terminal and press Enter.
All of the SES target components appear.
b) Identify the 4U60G2_STOR_ENCL appears near the top of the results.
4. Verify the number of drive seen by the firmware are the same amount that are populated in the physical
slots.
a) To identify the SES target, type lsscsi –s into the terminal and press Enter.
All of the SES target components appear with drive population and capacities listed.
b) Verify that the drives in the populated slots have a part number and drive capacity listed.
5. Slide the enclosure out of the rack.
59
11
System Upgrades
Installation Guide
11.2
Drive Kits
