1. Slide the enclosure out of the rack.
a) From the front of the enclosure, turn the thumbscrews counterclockwise.
Figure 16: Chassis—Thumbscrews Counterclockwise
b) To slide the enclosure out of the rack, pull on the enclosure rack ears until the drive bay is fully accessible.
Figure 17: Chassis—Pull Out
2. Install the drive into the drive bay.
a) From the front of the enclosure cover, turn the thumbscrews counterclockwise.
b) Slide the drive bay cover towards the front of the enclosure and up.
c) Open the first drive carrier by sliding the arrow tab in the direction of the arrow.
d) Starting with the last row, line up the drive with the carrier lever open, and slide it into the drive bay.
e) Press on the arrow tab until the drive is fully seated.
30
8
Installing the 4U60 G2 Storage Enclosure
Installation Guide
8.5
Installing HDDs into the Chassis
