User Guide
4. Management
4.8 Subenclosure Nickname
serial : USWSJ02819EZ0012
firmware: 2050-028
name : Ultrastar Data102
Step 5 :
Use the WDDCS Tool's
iom
command to determine which IOM each handle is assigned to:
C:\> wddcs iom
wddcs v1.1.8.0
Copyright (c) 2019-2020 Western Digital Corporation or its affiliates
Device: SCSI3:0,84,0
Dual IOM operation
IOM A
Device: SCSI3:1,29,0
Dual IOM operation
IOM B
Step 6 :
Use the WDDCS Tool's
zone status
command along with the appropriate SEP handle to verify
the zoning configuration of each IOM:
C:\> wddcs SCSI3:0,84,0 zone status
wddcs v1.1.8.0
Copyright (c) 2019-2020 Western Digital Corporation or its affiliates
Device: SCSI3:0,84,0
Zoning (Disabled)
C:\> wddcs SCSI3:1,29,0 zone status
wddcs v1.1.8.0
Copyright (c) 2019-2020 Western Digital Corporation or its affiliates
Device: SCSI3:1,29,0
Zoning (Disabled)
Result:
The zone status of both IOMs should now be
Disabled
.
4.8
Subenclosure Nickname
4.8.1
Setting the Subenclosure Nickname
This task describes instructions for viewing and setting a subenclosure's nickname using
sg_ses
commands.
Before you begin:
In the following
sg_ses
examples, angle brackets surrounding a term (i.e.
<device>
)
either indicate a generic reference to an expected output or a command phrase that should be replaced
with the user's specific instance of that phrase (i.e.
/dev/sg2
).
Verify Support for the Nickname Feature
Step 1 :
Verify the subenclosure's support for the nickname feature by using the
sg_ses <device> -
p0x0
command to view the subenclosure's
Supported Diagnostic Pages
:
# sg_ses <device> -p0x0
251
Содержание 1EX1231
Страница 1: ...User Guide Ultrastar Data102 Regulatory Model H4102 J Document D018 000226 000 Revision 04 May 2022...
Страница 16: ...User Guide Points of Contact xv...
Страница 110: ...User Guide 3 Support 3 7 CMA Replacement Figure 91 CMA Cable Routing c Open all of the baskets Figure 92 Open Baskets 94...
