User Guide
3. Support
3.8 Rails Replacement
Figure 148:
Seating the 3.5in HDD Assembly
Step 33 :
Repeat this action to fully install the remaining drive assemblies in the same order, from left-to-
right, rear-to-front.
Step 34 :
Install the CMA(s).
Note:
The standard CMA has two arms, labeled "upper" and "lower." The lower
arm should have the elbow on the left side and be installed first; the upper arm
should have the elbow on the right side and be installed last.
Note:
CMA Lite has one arm, to be installed at the lower position. This arm should
have the elbow on the left side.
a.
Orient the CMA so that the elbow is on the left hand side.
b.
Attach all three of the connectors to the brackets on the rails. There should be one at the
elbow side and two at the other end.
134
Содержание 1EX1231
Страница 1: ...User Guide Ultrastar Data102 Regulatory Model H4102 J Document D018 000226 000 Revision 04 May 2022...
Страница 16: ...User Guide Points of Contact xv...
Страница 110: ...User Guide 3 Support 3 7 CMA Replacement Figure 91 CMA Cable Routing c Open all of the baskets Figure 92 Open Baskets 94...
