User Guide
3. Support
3.8 Rails Replacement
Figure 162:
Cinching Cable Retention Clip
For PSUs with the strap-style retention mechanism, secure the power cable to the PSU
handle with the hook-and-loop strap as shown in the following image.
Figure 163:
Strap-Style Cable Retention
f.
If the Ultrastar Data102 is being installed in a rack and will subsequently be transported
inside that rack, it is important to use the included cable tie to wrap the CMA bundle to
ensure it does not get damaged during transport. If the Ultrastar Data102 is instead being
installed where it will operated, skip this step.
g.
Close all of the baskets.
h.
Reconnect the CMA at the elbow to connector A.
Step 37 :
Test for binding in the extension of the arm by gently pulling the enclosure out of the rack,
ensuring the cables extend properly and that the system doesn’t bind at all. If it does, examine
the point at which the binding occurred and adjust the seating of cables in the baskets, check
the connections to the rails, and examine the joints of the arm to ensure that they are all
functioning properly.
145
Содержание 1EX1231
Страница 1: ...User Guide Ultrastar Data102 Regulatory Model H4102 J Document D018 000226 000 Revision 04 May 2022...
Страница 16: ...User Guide Points of Contact xv...
Страница 110: ...User Guide 3 Support 3 7 CMA Replacement Figure 91 CMA Cable Routing c Open all of the baskets Figure 92 Open Baskets 94...
