Wesco DTI10, Руководство пользователя

Страница: 8 / 86

5
A
D
C
3
Electric connection
It is very important to have the electric connection done by a qualified technician,
in order to make sure the installation is effected in accordance with the prevailing
standards and instructions.
Make sure that the voltage, which is to be connected, corresponds to the voltage
mentioned on the serial number plate (A) at the back of the dryer.
The connection needs to be made in the wiring box at the back of the dryer. Remove
the cover plate (C) in order to reach the connection clamps.
The connection cable needs to be brought in through the swivel (D).
The connection cable needs to be brought in through the swivel (H) on the side of
It is necessary to ground the dryer for your personal safety and to
ensure a good operation.
220/240V 3AC
The
3 mains wires (L1), (L2) and (L3)
should be connected to the 3 left clamps
and the yellow/green grounding wire (PE) should be connected to the grounding
clamp.
It is necessary to provide in the connection circuit fuses, which are easy to reach.
Value of the fuses :
DTI10 - 220/2 40V: 40A
DTI12 - 220/240V: 40A
DTI14 - 220/240V: 63A
380/415V 3AC+N
The
3 mains wires (L1), (L2) and (L3)
should be connected to the 3 left clamps,
the
blue neutral (N)
should be connected to the right clamp and the
yellow/green
grounding wire (PE)
should be connected to the grounding clamp.
It is necessary to provide in the connection circuit fuses, which are easy to reach.
Value of the fuses :
DTI10 - 380/415V: 25A
DTI12 - 380/415V: 25A
DTI14 - 380/415V: 40A