Wesco DTI10, Руководство пользователя

Страница: 36 / 86

33
5
Program development Display information:
When the cycle is started, the remaining drying time (here 30) is displayed. For a
coin-operated dryer, the cool down time is included in the drying time. A drying
cycle of 30 minutes consists of a drying time of 25 m 5 minutes of cool
down time.
When
“YES” is choosen in the setting menu under “FLS” , then the dry time and
the temperature are displayed alternately. When the temperature is indicated with
degrees "°C" , then the symbol (°) is displayed. When the temperature is indicated
for values, less than
100°F
, then this symbol
“°F”
is displayed.
When the heating is activated, the decimal point lights up.
Temporary interruption or change of the drying cycle.
By opening the door, the cycle can be interrupted temporary in order to reload, to
check the drying level or to change the cycle. All functions stop,
“Dr”
is blinking
on the display and
all leds, next to the push buttons
, are blinking as well. However,
the drying time keeps on counting down.
As soon as the door is closed, “STA” and the remaining cycle time are displayed alter-
nately. Now the cycle, or, if necessary another cycle, needs to be started again.
End of the drying time : change to cool down time.
When the drying time has come to an end (here 25 minutes), the cool down time
is automatically started (here 5 minutes). The user will not be informed of the start
of the cool down period.
Remark :
When a coin is inserted in the coin meter during the cycle (also during the cool down
period or when the door is opened), then this time will be added to the remaining
cycle time.
End of the drying cycle.
When the cool down time has come to an end, then the cycle is automatically ended
(here 25 + 5 = 30 minutes). “End” is displayed until the door is opened.
During the drying time:
- Do not use the emergency button to disconnect the dryer.
- Take the linen out of the drum in case of interruption of the drying cycle, power
failure or opening of the door