Wesco DTI10, Руководство пользователя

Страница: 19 / 86

16
StM (Steam: steam heating)
Push the middle button to continue.
YES or no
Select with the + button.
YES
: if the machine is warmed up with steam.
In the other case, select no.
Confirm the programmation with the middle button.
TMP (temperature sensor test)
Press the middle button to continue.
XX°
The drum temperature is appearing now as sensor test.
Meanwhile the 3 lets are lichting alternately
Press the middle button to continue.
Hereafter, you automatically return to the beginning.
The right DIP-switch needs to be put into the position "RUN" again.
in-
Here the inlets are being checked.
When the door is closed, LED 3 lights up.
The dryer is equipped with a sensor measuring the rpm of the drum, the dash next to" in" will blink if the drum is turned by
hand.
Press the middle button to continue.
9 dashes appear temporarily on the display. This is the end of the setting menu.
Then you automatically return to the beginning.
The right dip switch now needs to be put in the position
RUN
again.