Wesco DTI10, Руководство пользователя

Страница: 6 / 86

3
REBUILDING THE DRIER FOR ANOTHER TYPE OF GAS
- Rebuilding may only be carried out by competent and recognized personnel.
- Installation shall be carried out according to the standards in force in the coun-
try where the machine is used.
- Check the gas pressure of the installation.
- Inform yourself on the type of gas.
- Order the correct rebuilder set.
- Insert the correct gas injection part in the machine.
- Modify all data on the machine identification plate.
Gas type •
Country of destination •
Type of gas •
- When parts are removed, a leakage test shall be carried out to be sure that none
of the fittings leak.
APPLICABLE IN BELGIUM
- For rebuilding the drier for another type of gas, always contact the manufactu-
rer.
- Can only be effected under the responsibility of the manufacturer.

Only use the drier drum to dry textile that was washed in water.

Only insert spin-dried linen in the drier.

Do not use the appliance to dry materials with a low melting temperature (PVC, rubber,....).

Do not dry products that still contain solvents, oils or other inflammable products.

Do not dry curtains or other fibreglass textiles, except when the label indicates that this is
allowed.

The drier drum will not work when the front door or the dust filter door is open.
- Never have the drier drum work when the door is open without considering the safety
switches.

Do not use the drier drum:
- when it does not stop turning when the door is opened.
- when parts are missing or broken.
As a matter of course, these guidelines cannot avoid all risks of accidents. The operator should use
the machine with the utmost care.
Do not hesitate to contact the dealer when problems arise.
Non-observance of the installation, maintenance and/or operation instructions prescribed by the
manufacturer can cause physical injury and/or damage to property.
Remark: