Wesco DTI10, Руководство пользователя

Страница: 23 / 86

20
4
°C or °F
Select degrees °C or degrees °F by means of the “+ button” (right button).
Confirm the selection by means of the middle button.
TE I (temperature program 1)
Press the middle button to continue.
XX
If necessary, change this value (default 40°C/104°F) by means of the + or - button between 25°C/77°F and 90°C/194°F.
-Each time these buttons are pressed and released, the adjustment is being increased or decreased with 1 unit. By keeping these
buttons pressed, the value is continuously changed.
-These standards prevail for all adjustments, which need to be changed.
Value "0" can be adjusted here as well but it is only valid in case of dryers, where the temperature adjustment
is being made by means of a knob.
Confirm the adjustment by means of the middle button.
For dryers without reversing, the program goes immediately to " TE2 ".
St 1 (Stop time between left - right movement of the drum)
Press the middle button to continue.
XX
Change if necessary this value (default 5 seconds) by means of + or - button between 0 and 10 seconds.
Confirm the adjustment by means of the middle button.
When "O" is filled in, the program goes immediately to "
TE2
". Because of this, the program will be executed
without reversing.
Ar 1 (Action time of the drum right movement)
Press the middle button to continue.
XX
Change if necessary this value (default 30 seconds) by means of the + or - button between 5 and 120 seconds.
Confirm the adjustment by means of the middle button.
AL1 (Action time of the drum left movement)
Press the middle button to continue.
XX
Change if necessary this value (default 20 seconds) by means of the + or - button between 5 and 120 seconds.
Confirm the adjustment by means of the middle button.
TE 2 (Temperature program 2)
Press the middle button to continue.
XX
If necessary, change this value (default 55°C/131°F) by means of the + or - button between 25°C/77°F and 90°C/194°F.
Confirm the adjustment by means of the middle button.
For dryers without reversing, the program goes immediately to " TE3 ".