Wesco DTI10, Руководство пользователя

Страница: 38 / 86

35
7
Maintenance
Cleaning
It is advisable to remove all dust particles in and around the dryer at fixed times.
It is best to determine these fixed times by experience, as they differ from place
to place.
The output of the dryer depends on a good air circulation. This airflow can be
influenced by accumulation of dust particles.
The dust particles of most fabrics are highly combustible. Accumulation
of these dust particles means a potential fire risk.
Open the dust filter door and remove all the piled-up dust at the underside of the
filter and inside the filter chamber.
Daily
Monthly
Remove all the dust out of the heating compartment and the burner. Dust, which
enters into the burner, can combust.
Gas- or steam heated dryers need to cleaned 2 times a month.
Remove all the dust of the temperature sensor and the security thermostat.
Every 3 months Remove all the dust and dirt of the motors, belts, etc.
Checking (after the installation and every 3 months)
Check if all safety devices still function such as overheat thermostat, sale switch,
flame detection, door contacts etc.
Check the belt tension.