Wesco DTI10, Руководство пользователя

Страница: 32 / 86

29
5
Select and start the
drying cycle.
Press 1 of the 3 buttons shortly and release it in order to start 1 of the preprogrammed
drying programs (see adjustment menu).
Temperature Drying time Cool down time
Left button (blue) (40°C - 104°F) 30' 5'
Middle button (orange) (55°C - 131°F) 30' 5'
Right button (red)
(70°C - 158°F) 30' 5'
The led, next to the button, lights up when the cycle is started.
Program development
Display information :
A drying cycle consists of “drying time + cool down time” (30 + 5 = 35 minutes).
When the cycle is started, the remaining drying time (here 30) is displayed. The cool
down time isn’t taken into account.
When
“YES”
is choosen in the setting menu under
“FLS”
, then the dry time and the
temperature are displayed alternately. When the temperature is indicated with degrees
C , then the symbol ( ° ) is displayed. When the temperature is indicated for values, less
than 100°F , then this symbol “°F” is displayed.
When the heating is activated, then the decimal point lights up.
Change the remaining drying time.
The remaining drying time can be reduced or extended by means of the left or the
right button. If the drying time is reduced to “O” , then the cool down time starts.
Temporary interruption of the remaining drying time.
By opening the door, the cycle can be interrupted temporary in order to reload or to
check the drying level. All functions stop, “Dr” is blinking on the display and the led
of the button is also blinking. However, the drying time keeps on counting down. As
soon as the door is closed,
the cycle needs to be started again.
Early termination of the drying cycle.
By pressing the middle button and releasing it again, the drying cycle is terminated.
“End”
is displayed until the door is opened.