Wesco DTI10, Руководство пользователя

Страница: 11 / 86

8
+
B
A
4
Setting mode
DIP-switches
In this setting mode, there should be adjusted if the dryer has to be executed with a
coinmeter or not, and 3 programs can be preprogrammed.
There are 2 DIP-switches at the back of the printboard.
In order to reach the switches :
- First remove the two screws (A) at the back of the dryer and then the top panel.
- The printboard is situated at the back of the control panel (B).
- You can find the dip-switches at the back of the printboard.
By means of the left switch, the manufacturer can adjust if the dryer needs to be
executed with a coin operated dryer or not. If it concerns a coin operated dryer, the
switch is put downwards (COIN) . In case of an OPL dryer, the switch is put upwards
(OPL) .
The right switch is put upwards (RUN) . By putting this switch downwards (PRG) ,
you can enter into the
setting menu
.
The following buttons have a specific function in the setting menu:
- Left button : decreases a value.
- Middle button : confirms a value and/or continues.
- Right button : increases a value.
The setting menu is different for a dryer with or without coinmeter.
Setting menu