Wells Showroom SHW-11, Руководство по эксплуатации

Страница: 10 / 14

TROUBLE SHOOTING SUGGESTIONS
8
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
No power to warmer Circuit breaker off or tripped Reset circuit breaker
Unit not plugged in Make sure unit is plugged in to
power receptacle
Warmer will not heat Temperature control not set Set control to desired temperature
Internal damage Contact Wells Service Dept.
(888) 492-2782 for repairs
Warmer trips circuit breaker Wet insulation Allow to dry
Pan leaking or other internal
damage Contact Wells Service Dept.
(888) 492-2782 for repairs
Internal damage Contact Wells Service Dept.
(888) 492-2782 for repairs
Warmer slow to heat Mineral deposits on pan acting as
a insulator Clean pan(s) with Wells Delime
Cleaner.
Connected to wrong voltage Verify supply voltage (must match
voltage on warmer nameplate)
Too much water in pan Remove water from pan until
3/4” of water remains in pan
There are no user-serviceable
components in the warmer.
In all instances of damage or
malfunction, Contact Wells
Service Dept. (888) 492-2782
for service or repairs
031 306
484 OpM
a
n
ual
for SH
W
-Serie
s
W
a
rm
ers