Operating instructions Medial
__________________________
34
•
All powered functions can be operated through the manual control unit and work without
interception nor extraordinary noise development.
•
The bed height can be lifted and lowered from 400 to 800 mm without interception.
•
The hoist motors disconnect automatically at reaching the max switch position 400 mm (lowest
position) as well as at reaching the max. switch position 800 mm ( highest position)with an
easily audible click. The main drive disconnects automatically when reaching the adjustable
angles with an easily audible click.
•
The headrest and the knee kink can be easily adjusted to its angles and get back into their
original position when the lying surface is lowered down and the motor switches off with an
easily audible click.(for operating please refer to 6.3 ff)
If your health care bed disposes of the special equipment Trendelenburg
positioning, it has to be inspected, too.
Check whether the manual control unit operates all functions as
described in 6.3.
Put the Trendelenburg positioning and the anti-Trendelenburg positioning
respectively into operation via the manual control unit (refer to 6.3 and 6.4
for operating instructions).
(Pay attention to the locking modus of the manual control unit)
The locking feature and the powered functions run without interception.
•
The operating unit (manual control unit) is technically in perfect condition and disposes of a
hanger and the magnetic key is available.
•
The emergency lowering device as described in 3.6 is operable without interception.
The emergency lowering device of the Trendelenburg positioning and anti Trendelenburg
positioning is working faultless via the manual control unit and the rechargeable battery
respectively.
That means that with charged rechargeable battery the bed is operable without any further
power source and putt he bed back from the Trendelenburg position into the normal flat
position. When checking this function please unplug the main plug from the socket.
•
The rechargeable battery shows a sufficient energy level on the rechargeable battery control
display. (or operating instructions refer to 6.3)
•
All necessary screws for mounting are friction-locked.
•
Series adhesive label (inside lying surface) is attached and well readable.
•
CE- adhesive label available at the lying surface and well readable.
•
Head section adhesive label at the lying surface is available and well readable.
•
Workload adhesive label is available at the lying surface and well readable.
•
Adhesive labels for the power supply is available at the lying surface and well readable.
After having carried out this visual and function control this has to be counter-signed in the maintenance
booklet (chapter 12) by a specialized dealer (i.e. rehabilitation supply store).
