Operating instructions Medial
__________________________
13
4. Without holding on you can now attach the other end of the side rails to the guide pusher.
5. Insert the freehand-attached guide pusher into the aluminium-rail at the other front module.
(same procedure – please pay attention to the snap fasteners!)
4. Please repeat this procedure at the other bed side, too.
Information:
When adjusting the lying surface by inappropriate handling: Danger of being crushed between
side rails and lying surface!
Furthermore it is necessary to keep the side rails fully functional as they have been at the time
of delivery. i.e.: occasional cleaning of the aluminium- rails. Do not use any broken or defective
side rails.
For security reasons it is not permitted to use the side rails propped up diagonally.
(please refer to chapter 3.4!)
The ready-mounted side-rails are easily adjustable to the higher and lower position as shown on the
following figure.
Lowest position
Highest position
3.0 Connecting and laying of all plugs and cables
3.1 Connecting the power supply
