Operating instructions Medial
__________________________
12
5. Repeat this procedure for the other front-module (Raise the lying surface and insert it on the
rectangular tubes, etc.) and make sure to get a securely attached connection of the front
module and lying surface.
6. Finally the 4 location points to the front modules behind the winged bolts have to be screwed
tight with one grub screw each (Allen key of the accessories kit).
2.4 Installation of the side-rails
1. There are 2 side-rails on each bedside needed
.
Caution: Rounding points upwards!
2. First of all it is necessary to attach the 2 guide pushers to the front section ( push the
lower snap fastener and insert the guide pusher head-up through the lower opening
of the aluminium-rail; the guide pusher has to slide easily back and forth the two
snap fasteners).
Head of guide-pusher
Please insert guide pusher like this in
the aluminium-rail.
3. Place the guide pusher at the
front and slip two wooden
side-rails on the fingers of the
guide pusher
