Enterprise IP Phone Advanced Phone Functions
73
make the assignment, there is a pull-down menu in the
Type
field, and choose
URL
from the list.
2)
Enter the number you want to set as URL in the
Value
field.
3)
Press
Confirm
button to save the changes.
SNMP
Simple Network Management Protocol (SNMP) is an Internet-standard protocol for
managing devices in IP networks. It is used mostly in network management systems
to monitor network-attached devices for conditions that warrant administrative
attention. SNMP exposes management data in the form of variables on the managed
systems, which describe the system configuration. These variables can then be
queried (and sometimes set) by managing applications. For further information, you
can refer to
http://en.wikipedia.org/wiki/SNMP
.
By default, the phone does not accept SNMP requests. This is necessary because
SNMP might introduce unwanted security threats. The phone only supports the GET
request of SNMP. SET or other requests are not supported. To enable SNMP, you
must specify what IP addressed may send SNMP requests to the phone.
To configure SNMP via Web interface:
1)
Click on
Network
->
Advanced
.
2)
Select
Enabled
in the pull-down menu of
SNMP Active
.
